expertfea.com logo

Solved FEA Pack 11 (Cases 101-110)


If you are interested in running the FEA scenarios seen underneath, you can download their MECHDAT files to see the settings we used for materials, mesh, contacts, loads, time steps, solver etc., together with their 3D models. On this page you find only MECHDAT files and 3D models; the PDF tutorials are found on the pages seen in the menu!

ANSYS WB 15 OR HIGHER

101. ANSYS WB FINITE ELEMENT ANALYSIS - Reinforced and un-reinforced concrete walls during blast loading

Click for video with results on

Get the ANSYS WB 15 MECHDAT file + DesignModeler geometry for 17$

ANSYS WB 15 OR HIGHER

102. ANSYS WB EXPLICIT DYNAMICS WITH FLUIDS - Bullet penetrating a tank filled with water

Click for video with results on

Get the ANSYS WB 15 MECHDAT file + 3D model for 15$

ANSYS WB 15 OR HIGHER

103. ANSYS WB FINITE ELEMENT ANALYSIS - Firing of a rifle bullet into a plate

Click for video with results on

Get the ANSYS WB 15 MECHDAT file + 3D model for 17$

ANSYS WB 15 OR HIGHER

104. ANSYS WB FINITE ELEMENT ANALYSIS - Fracture mechanics simulation of STEEL 1006

Click for video with results on

Get the ANSYS WB 15 MECHDAT file + 3D model for 13$

ANSYS WB 15 OR HIGHER

105. ANSYS WB FINITE ELEMENT ANALYSIS - Simulation of seat belt and dummy at 150g deceleration

Click for video with results on

Get the ANSYS WB 15 MECHDAT file + 3D model for 13$

ANSYS WB 15 OR HIGHER

106. ANSYS WB FINITE ELEMENT ANALYSIS - FEA simulation of a geared fidget spinner

Click for video with results on

Get the ANSYS WB 15 MECHDAT file + 3D model for 13$

ANSYS WB 15 OR HIGHER

107. ANSYS WB FINITE ELEMENT ANALYSIS - Extension, Bending and Torsion of a fractured femur with plate

Click for video with results on

Get the ANSYS WB 15 MECHDAT file + 3D model for 13$

ANSYS WB 15 OR HIGHER

108. ANSYS WB EXPLICIT DYNAMICS WITH FLUIDS - Piston pressing on a volume of water

Click for video with results on

Get the ANSYS WB 15 MECHDAT file + 3D model for 17$

☆ The MECHDAT files give you hints for your FEA work or training, by observing our set-up: geometry, materials, mesh, boundary conditions, analysis settings and solution items as seen in their Youtube clips. Solving is not guaranteed 100%, because ANSYS continuously changes the solving algorithms; usually they do a good job, sometimes...

☆ After you made the purchase, open the MECHDAT file and re-solve the FEA as follows:

⇒ for Static and Transient Structural: right click Solution, Clear Generated Data, Solve;

⇒ for Explicit Dynamics: right click Solution, Clear Generated Data, then go to Analysis Settings, Step Controls, Resume From Cycle = 0, Solve.

☆ Pay attention to the mentioned ANSYS Workbench version, because older versions will not open the files!