expertfea.com logo

Solved FEA Pack 19 (Cases 181-190)


If you are interested in running the FEA scenarios seen underneath, you can download the respective ANSYS project data (as MECHDAT files) to see the settings we used for materials, mesh, contacts, loads, time steps, solver etc., together with their 3D models. On this page you find only MECHDAT files and 3D models; the PDF tutorials are found on the pages seen in the menu!

ANSYS WB 15 OR HIGHER

181. 1st in the World!!! ANSYS WB EXPLICIT DYNAMICS WITH FLUIDS - Injecting water with syringe in a vein

Click for video with results on

If you have ANSYS WB 15 or higher, get the ANSYS Workbench data as MECHDAT file + the 3D model for only 19$

ANSYS WB 15 OR HIGHER

182. 1st in the World!!! ANSYS WB FEA - Real size skull with teeth chewing gum

Click for video with results on

If you have ANSYS WB 15 or higher, get the ANSYS Workbench data as MECHDAT file + the 3D model for only 19$

ANSYS WB 15 OR HIGHER

183. 1st in the World!!! ANSYS WB FEA - Boxing punch of a plastic skull with mouth guard

Click for video with results on

If you have ANSYS WB 15 or higher, get the ANSYS Workbench data as MECHDAT file + the 3D model for only 19$

ANSYS WB 15 OR HIGHER

184. ANSYS Workbench Finite Element Analysis - Spiral bevel gears in motion

Click for video with results on

If you have ANSYS WB 15 or higher, get the ANSYS Workbench data as MECHDAT file + the 3D model for only 13$

ANSYS WB 17.1 OR HIGHER

185. ANSYS Workbench Finite Element Analysis - Simulation of plane impacting and crashing into a building

Click for video with results on

If you have ANSYS WB 17.1 or higher, get the ANSYS Workbench data as MECHDAT file + the 3D model for only 17$

ANSYS WB 19.1 OR HIGHER

186. ANSYS Workbench Finite Element Analysis - Heat generation and dissipation during braking process (final)

Click for video with results on

Not for beginners, it contains some APDL commands! If you have ANSYS WB 19.1 or higher, get the ANSYS Workbench data as MECHDAT file + the 3D model for only 19$

ANSYS WB 15.0 OR HIGHER

187. ANSYS WB Explicit Dynamics FEA - Machining of a pipe via beveling process

Click for video with results on

If you have ANSYS WB 15.0 or higher, get the ANSYS Workbench data as MECHDAT file + the 3D model for only 13$

ANSYS WB 15.0 OR HIGHER

188. 1st in the World!!! ANSYS WB Explicit Dynamics with fluids - Rotating bullet shot into water

Click for video with results on

If you have ANSYS WB 15.0 or higher, get the ANSYS Workbench data as MECHDAT file + the 3D model for only 13$

ANSYS WB 15.0 OR HIGHER

189. ANSYS WB Static Structural - Insertion of shaft and squeezing an o-ring seal

Click for video with results on

If you have ANSYS WB 15.0 or higher, get the ANSYS Workbench data as MECHDAT file + the 3D model for only 13$

ANSYS WB 17.1 OR HIGHER

190. ANSYS WB Explicit Dynamics - Car braking with dummy under 3 point seatbelt at 150g deceleration (v2)

Click for video with results on

If you have ANSYS WB 17.1 or higher, get the ANSYS Workbench data as MECHDAT file + the 3D model for only 13$

☆ The MECHDAT files give you hints for your FEA work or training, by observing our set-up: geometry, materials, mesh, boundary conditions, analysis settings and solution items as seen in their YouTube clips. Solving is not guaranteed 100%, because ANSYS continuously changes the solving algorithms; usually they do a good job, sometimes...

After you made the purchase, open the MECHDAT file and re-solve the FEA as follows:

⇒ for Static and Transient Structural: right click Solution, Clear Generated Data, Solve;

⇒ for Explicit Dynamics: right click Solution, Clear Generated Data, then go to Analysis Settings, Step Controls, Resume From Cycle = 0, Solve.

☆ Pay attention to the mentioned ANSYS Workbench version, because older versions will not open the files!