expertfea.com logo

Solved FEA Pack 21 (Cases 201-210)


If you are interested in running the FEA scenarios seen underneath, you can download the respective ANSYS project data (as MECHDAT files) to see the settings we used for materials, mesh, contacts, loads, time steps, solver etc., together with their 3D models. On this page you find only MECHDAT files and 3D models; the PDF tutorials are found on the pages seen in the menu!

ANSYS WB 19.1 OR HIGHER

201. 1st in the World!!! ANSYS WB Transient Structural - Motion simulation of a hypocyclic engine

Click for video with results on

If you have ANSYS WB 19.1 or higher, get the ANSYS Workbench data as MECHDAT file + the 3D model for only 14$

ANSYS WB 15 OR HIGHER

202. 1st in the World!!! ANSYS WB Explicit Dynamics - Real earthquake simulation of rigid bodies

Click for video with results on

If you have ANSYS WB 15 or higher, get the ANSYS Workbench data as MECHDAT file + the 3D model for only 13$

ANSYS WB 19.1 OR HIGHER

203. ANSYS Workbench Explicit Dynamics - Drop test of an Aluminum box falling from 2 m height

Click for video with results on

If you have ANSYS WB 19.1 or higher, get the ANSYS Workbench data as MECHDAT file + the 3D model for only 13$

ANSYS WB 19.1 OR HIGHER

204. ANSYS Workbench Transient Structural - Motion simulation of a 6 bar mechanism

Click for video with results on

If you have ANSYS WB 19.1 or higher, get the ANSYS Workbench data as MECHDAT file + the 3D model for only 13$

ANSYS WB 19.1 OR HIGHER

205. 1st in the World!!! ANSYS Workbench Explicit Dynamics - Drop test of water droplet on rigid surface

Click for video with results on

If you have ANSYS WB 19.1 or higher, get the ANSYS Workbench data as MECHDAT file + the 3D model for only 13$

☆ The MECHDAT files give you hints for your FEA work or training, by observing our set-up: geometry, materials, mesh, boundary conditions, analysis settings and solution items as seen in their YouTube clips. Solving is not guaranteed 100%, because ANSYS continuously changes the solving algorithms; usually they do a good job, sometimes...

After you made the purchase, open the MECHDAT file and re-solve the FEA as follows:

⇒ for Static and Transient Structural: right click Solution, Clear Generated Data, Solve;

⇒ for Explicit Dynamics: right click Solution, Clear Generated Data, then go to Analysis Settings, Step Controls, Resume From Cycle = 0, Solve.

☆ Pay attention to the mentioned ANSYS Workbench version, because older versions will not open the files!