expertfea.com logo

Solved FEA Pack 23 (Cases 221-230)


If you are interested in running the FEA scenarios seen underneath, you can download the respective ANSYS project data (as MECHDAT files) to see the settings we used for materials, mesh, contacts, loads, time steps, solver etc., together with their 3D models. On this page you find only MECHDAT files and 3D models; the PDF tutorials are found on the pages seen in the menu!

ANSYS 19.1 OR HIGHER

221. 1st in the World!!! ANSYS WB Explicit Dynamics CEL - Launch of a shell rocket with TNT solid fuel

Click for video with results on

If you have ANSYS WB 19.1 or higher, get the ANSYS Workbench MECHDAT file + the 3D model for only $16

ANSYS 2019R2 OR HIGHER

222. 1st in the World!!! ANSYS WB Transient Structural - Toy train being forcefully pushed on the tracks

Click for video with results on

If you have ANSYS WB 2019R2 or higher, get the ANSYS Workbench MECHDAT file + the 3D model for only $16

ANSYS 2019R2 OR HIGHER

223. 1st in the World!!! ANSYS WB Static Structural - Simulation of a teleferic or telpher cable car

Click for video with results on

If you have ANSYS WB 2019R2 or higher, get the ANSYS Workbench MECHDAT file + the 3D model for only $17

ANSYS 19.1 OR HIGHER

224. 1st in the World!!! ANSYS WB Explicit Dynamics - 2D FEA Simulation of Machining by Milling

Click for video with results on

If you have ANSYS WB 19.1 or higher, get the ANSYS Workbench MECHDAT file + the 3D model for only $15

ANSYS 19.1 OR HIGHER

225. 1st in the World!!! ANSYS WB Static Structural - Simulation of a constant velocity or Weiss joint

Click for video with results on

If you have ANSYS WB 19.1 or higher, get the ANSYS Workbench MECHDAT file + the 3D model for only $15

ANSYS 2019 R3 OR HIGHER

226. 1st in the World!!! ANSYS WB Explicit Dynamics CEL - Simple wave generator

Click for video with results on

If you have ANSYS WB 2019 R3 or higher, get the ANSYS Workbench MECHDAT file + the 3D model for only $13

ANSYS 19.1 OR HIGHER

227. ANSYS WORKBENCH STATIC STRUCTURAL - FEA OF A FULL ROLLER BEARING WITH CAGE

Click for video with results on

If you have ANSYS WB 19.1 or higher, get the ANSYS Workbench MECHDAT file + the 3D model for only $15

ANSYS 19.1 OR HIGHER

228. 1st in the World!!! ANSYS WB Explicit Dynamics - Tooth extraction simulation with gum erosion (v1)

Click for video with results on

If you have ANSYS WB 19.1 or higher, get the ANSYS Workbench MECHDAT file + the 3D model for only $15

ANSYS 19.1 OR HIGHER

229. ANSYS WB Explicit Dynamics - FEA simulation of a rigid sphere being dropped on nylon wires

Click for video with results on

If you have ANSYS WB 19.1 or higher, get the ANSYS Workbench MECHDAT file + the 3D model for only $14

ANSYS 19.1 OR HIGHER

230. ANSYS WB Static Structural - Extension, compression, torsion and bending tests on a rubber sponge

Click for video with results on

If you have ANSYS WB 19.1 or higher, get the ANSYS Workbench archive with 4 FEA scenarios + the 3D model for only $17

☆ The MECHDAT files give you hints for your FEA work or training, by observing our set-up: geometry, materials, mesh, boundary conditions, analysis settings and solution items as seen in their YouTube clips. Solving is not guaranteed 100%, because ANSYS continuously changes the solving algorithms; usually they do a good job, sometimes...

After you made the purchase, open the MECHDAT file and re-solve the FEA as follows:

⇒ for Static and Transient Structural: right click Solution, Clear Generated Data, Solve;

⇒ for Explicit Dynamics: right click Solution, Clear Generated Data, then go to Analysis Settings, Step Controls, Resume From Cycle = 0, Solve.

☆ Pay attention to the mentioned ANSYS Workbench version, because older versions will not open the files!



© EXPERTFEA.COM, 2013 - 2021