Solved FEA Pack 24 (Cases 231-240)

Get these FEA files to see the settings we used for materials, mesh, contacts, loads, time steps, solver etc. On this page you find only MECHDAT or WBPZ files and 3D models, while the PDF tutorials are found on the TUTORIALS and SHORT TUTORIALS pages!

ANSYS WB 2019 R3 OR HIGHER

231. 1st in the World!!! ANSYS Modal, Modal Acoustics - Lamella in water has lower resonance frequencies

Click for video with results on

If you have ANSYS WB 2019 R3 or higher, get the 2 ANSYS Workbench MECHDAT files + the 3D model for only $14

ANSYS WB 19.1 OR HIGHER

232. ANSYS WB Explicit Dynamics - FEA simulation of a rigid frame with bricks under a real seismic load

Click for video with results on

If you have ANSYS WB 19.1 or higher, get the ANSYS Workbench MECHDAT file + the 3D model for only $15

ANSYS WB 2019 R3 OR HIGHER

233. ANSYS WB Static Structural FEA - 1 vs. 2 Fatigue Cracks Propagating in Steel

Click for video with results on

If you have ANSYS WB 2019 R3 or higher, get the 2 x ANSYS Workbench MECHDAT files + the 2 x 3D models for only $19

ANSYS WB 2020 R2 OR HIGHER

234. 1st in the World!!! ANSYS WB Explicit Dynamics SPH - Rigid Asteroid Impacting a Planet (small scale)

Click for video with results on

If you have ANSYS WB 2020 R2 or higher, get the ANSYS Workbench MECHDAT files + the 3D model for only $15

ANSYS WB 2020 R2 OR HIGHER

235. 1st in the World!!! ANSYS WB Explicit Dynamics SPH - Drop test and breaking of a thick glass bottle

Click for video with results on

If you have ANSYS WB 2020 R2 or higher, get the ANSYS Workbench MECHDAT files + the 3D model for only $16

ANSYS WB 19.1 OR HIGHER

236. ANSYS WB Static Structural - FEA simulation of the closing and opening of an aortic valve

Click for video with results on

If you have ANSYS WB 19.1 or higher, get the ANSYS Workbench MECHDAT files + the 3D model for only $12

ANSYS WB 2020 R2 OR HIGHER

237. 1st in the World!!! ANSYS WB Explicit Dynamics SPH - Raining on umbrella and collecting the water

Click for video with results on

If you have ANSYS WB 2020 R2 or higher, get the ANSYS Workbench MECHDAT files + the 3D model for only $14

ANSYS WB 19.1 OR HIGHER

238. 1st in the World!!! ANSYS WB Explicit Dynamics - Car bumper impacting hip on 2 directions at 36 km/h

Click for video with results on

If you have ANSYS WB 19.1 or higher, get the ANSYS Workbench 2 x MECHDAT files + 2 x 3D models for only $18

ANSYS WB 2020 R2 OR HIGHER

239. 1st in the World!!! ANSYS Explicit Dynamics SPH - Fracturing an unreinforced concrete beam by bending

Click for video with results on

If you have ANSYS WB 2020 R2 or higher, get the ANSYS Workbench MECHDAT files + the 3D model for only $14

ANSYS WB 19.1 OR HIGHER

240. Motion simulation of a trolley mechanism on a rectilinear tube - ANSYS WB Transient Structural

Click for video with results on

If you have ANSYS WB 19.1 or higher, get the ANSYS Workbench MECHDAT files + the 3D model for only $16

☆ The MECHDAT files give you hints for your FEA work or training, by observing our set-up: geometry, materials, mesh, boundary conditions, analysis settings and solution items as seen in their YouTube clips. Solving is not guaranteed 100%, because ANSYS continuously changes the solving algorithms; usually they do a good job, sometimes...

☆ After you made the purchase, open the MECHDAT file and re-solve the FEA as follows:

⇒ for Static and Transient Structural: right click Solution, Clear Generated Data, Solve;

⇒ for Explicit Dynamics: right click Solution, Clear Generated Data, then go to Analysis Settings, Step Controls, Resume From Cycle = 0, Solve.

☆ BE SURE TO HAVE THE SAME OR EVEN A NEWER ANSYS VERSION, BECAUSE OLDER VERSIONS WILL NOT OPEN THE NEWER FILES!