Solved FEA Pack 25 (Cases 241-250)

Purchase our FEA files to see the settings we used for materials, mesh, contacts, loads, time steps, solver etc. On this page you find only MECHDAT or WBPZ files and 3D models, while the PDF tutorials are found on the TUTORIALS and SHORT TUTORIALS pages!

ANSYS WB 2020 R2 OR HIGHER

241. Small water drop (droplet) impacting a bigger one - ANSYS Explicit Dynamics SPH, 1st in the World!!!

Click for video with results on

If you have ANSYS WB 2020 R2 or higher, get the ANSYS Workbench MECHDAT file + the 3D model for only $14

ANSYS WB 2020 R2 OR HIGHER

242. Drop test with brittle fracture of a wine glass - ANSYS Explicit Dynamics SPH, 1st in the World!!!

Click for video with results on

If you have ANSYS WB 2020 R2 or higher, get the ANSYS Workbench MECHDAT file + the 3D model for only $15

ANSYS WB 2019 R3 OR HIGHER

243. Crack propagation in Aluminum 6061-T6 gear using SMART (XFEM like), under cyclic load - ANSYS WB

Click for video with results on

If you have ANSYS WB 2019 R3 or higher, get the ANSYS Workbench MECHDAT file + the 3D model for only $14

ANSYS WB 2020 R2 OR HIGHER

244. Water pouring from 6 m height funnel into a tank - ANSYS Explicit Dynamics SPH, 1st in the World!!!

Click for video with results on

If you have ANSYS WB 2020 R2 or higher, get the ANSYS Workbench MECHDAT file + the 3D model for only $14

ANSYS WB 2020 R2 OR HIGHER

245. Water tank sloshing due to seismic load - ANSYS Explicit Dynamics SPH, 1st in the World!!!

Click for video with results on

If you have ANSYS WB 2020 R2 or higher, get the ANSYS Workbench MECHDAT file + the 3D model for only $15

ANSYS WB 19.1 OR HIGHER

246. Structural simulation of a steel stent expansion - ANSYS WB Static Structural

Click for video with results on

If you have ANSYS 19.1 or higher, get the ANSYS Workbench MECHDAT file + the 3D model for only $14

ANSYS WB 19.1 OR HIGHER

247. Curved cycloidal teeth rack meshing with gear - ANSYS WB Static Structural

Click for video with results on

If you have ANSYS 19.1 or higher, get the ANSYS Workbench MECHDAT file + the 3D model for only $14

ANSYS WB 19.1 OR HIGHER

248. FEA simulation of pulling a small train by the locomotive - ANSYS WB Static Structural

Click for video with results on

If you have ANSYS 19.1 or higher, get the ANSYS Workbench MECHDAT file + the 3D model for only $15

ANSYS WB 2020 R2 OR HIGHER

249. Karate punch of iron hand breaking concrete brick - ANSYS Explicit Dynamics SPH, 1st in the World!!!

Click for video with results on

If you have ANSYS 2020 R2 or higher, get the ANSYS Workbench MECHDAT file + the 3D model for only $14

ANSYS WB 19.1 OR HIGHER

250. Simulation of a bullet being shot through a human jaw - ANSYS Explicit Dynamics, 1st in the World!!!

Click for video with results on

If you have ANSYS WB 19.1 or higher, get the ANSYS Workbench MECHDAT file + the 3D model for only $15

☆ The MECHDAT files give you hints for your FEA work or training, by observing our set-up: geometry, materials, mesh, boundary conditions, analysis settings and solution items as seen in their YouTube clips. Solving is not guaranteed 100%, because ANSYS continuously changes the solving algorithms; usually they do a good job, sometimes...

☆ After you made the purchase, open the MECHDAT file and re-solve the FEA as follows:

⇒ for Static and Transient Structural: right click Solution, Clear Generated Data, Solve;

⇒ for Explicit Dynamics: right click Solution, Clear Generated Data, then go to Analysis Settings, Step Controls, Resume From Cycle = 0, Solve.

☆ BE SURE TO HAVE THE SAME OR EVEN A NEWER ANSYS VERSION, BECAUSE OLDER VERSIONS WILL NOT OPEN THE NEWER FILES!