Solved FEA Pack 27 (Cases 261-270)

Get these FEA files to see the settings we used for materials, mesh, contacts, loads, time steps, solver etc. On this page you find only MECHDAT or WBPZ files and 3D models, while the PDF tutorials are found on the TUTORIALS and SHORT TUTORIALS pages!

AWB 2020 R2 OR HIGHER

261. Simulation of a circular wave generator using SPH - ANSYS WB Explicit Dynamics, 1st in the World!!!

Click for video with results on

If you have ANSYS WB 2020 R2 or higher, get the ANSYS Workbench Mechdat file + the 3D models for only $17

AWB 2020 R2 OR HIGHER

262. 2 Bar pressure inside rubber spring reinforced with polyethylene and steel wires - ANSYS WB Static Structural

Click for video with results on

If you have ANSYS WB 2020 R2 or higher, get the ANSYS Workbench solved archive + the 3D model for only $17

ANSYS WB 19.1 OR HIGHER

263. 2D FEA simulation of grinding an aluminum strip - ANSYS WB Explicit Dynamics, 1st in the World!!!

Click for video with results on

If you have ANSYS WB 19.1 or higher, get the ANSYS Workbench Mechdat file + the 2D model for only $17

ANSYS WB 19.1 OR HIGHER

264. Nitinol SE Superelastic stent insertion inside a blood vessel - ANSYS Workbench Static Structural

Click for video with results on

If you have ANSYS WB 19.1 or higher, get the ANSYS Workbench Mechdat file + the 3D model for only $17

AWB 2020 R2 OR HIGHER

265. Frozen bird strike jet engine test using SPH - ANSYS WB Explicit Dynamics, 1st in the World!!!

Click for video with results on

If you have ANSYS WB 2020 R2 or higher, get the ANSYS Workbench Mechdat file + the 3D model for only $17

ANSYS WB 19.1 OR HIGHER

266. Airplane landing on water and losing both engines - ANSYS WB Explicit Dynamics, 1st in the World!!!

Click for video with results on

If you have ANSYS WB 19.1 or higher, get the ANSYS Workbench Mechdat file + the 3D model for only $19

ANSYS WB 19.1 OR HIGHER

267. Enlarging the cracks on a fractured part decreases its resonance frequencies - ANSYS Workbench Modal

Click for video with results on

If you have ANSYS WB 19.1 or higher, get the ANSYS Workbench archived 4 cases + the 3D models for only $17

AWB 2019 R3 OR HIGHER

268. Equal Channel Angular Extrusion of Copper Rod with Plasticity - ANSYS Workbench Explicit Dynamics

Click for video with results on

If you have ANSYS WB 2019 R3 or higher, get the ANSYS Workbench Mechdat file + the 3D models for only $17

AWB 19.1 OR HIGHER

269. Insertion simulation of catheter guide wire into a blood vessel - ANSYS Workbench Explicit Dynamics

Click for video with results on

If you have ANSYS 19.1 or higher, get the ANSYS Workbench Mechdat file + the 3D model for only $17

AWB 19.1 OR HIGHER

270. Wear simulation with mesh erosion of a polyethylene brake pad - ANSYS Workbench Transient Structural

Click for video with results on

If you have ANSYS 19.1 or higher, get the ANSYS Workbench Mechdat file + the 3D model for only $17

☆ The MECHDAT files give you hints for your FEA work or training, by observing our set-up: geometry, materials, mesh, boundary conditions, analysis settings and solution items as seen in their YouTube clips. Solving is not guaranteed 100%, because ANSYS continuously changes the solving algorithms; usually they do a good job, sometimes...

☆ After you made the purchase, open the MECHDAT file and re-solve the FEA as follows:

⇒ for Static and Transient Structural: right click Solution, Clear Generated Data, Solve;

⇒ for Explicit Dynamics: right click Solution, Clear Generated Data, then go to Analysis Settings, Step Controls, Resume From Cycle = 0, Solve.

☆ BE SURE TO HAVE THE SAME OR EVEN A NEWER ANSYS VERSION, BECAUSE OLDER VERSIONS WILL NOT OPEN THE NEWER FILES!