Solved FEA Pack 29 (Cases 281-290)

Get these FEA files to see the settings we used for materials, mesh, contacts, loads, time steps, solver etc. On this page you find only MECHDAT or WBPZ files and 3D models, while the PDF tutorials are found on the TUTORIALS and SHORT TUTORIALS pages!

AWB 19.1 OR HIGHER

281. Simulation of clot removal during mechanical thrombectomy - ANSYS Workbench Explicit Dynamics

Click for video with results on

If you have ANSYS WB 19.1 or higher, get the ANSYS Workbench Mechdat file + the 3D model for only $19

AWB 19.1 OR HIGHER

282. Applying bolt pretension on M12 screws then pull-out of eye bolt - ANSYS Workbench Static Structural

Click for video with results on

If you have ANSYS WB 19.1 or higher, get the ANSYS Workbench Mechdat file + the 3D model for only $17

AWB 19.1 OR HIGHER

283. Kayaker fights to keep his head above water and succeeds - ANSYS WB Explicit Dynamics with Fluids

Click for video with results on

If you have ANSYS WB 19.1 or higher, get the 2 x ANSYS Workbench Mechdat files + the 3D models for only $17

AWB 2021 R1 OR HIGHER

284. Seism on structure reinforced with non-linear steel at max. 14 g on all 3 axes - ANSYS WB Transient Structural

Click for video with results on

If you have ANSYS WB 2021 R1 or higher, get the 3 x ANSYS Workbench FEA cases + the 3D models for only $16

AWB 19.1 OR HIGHER

285. Video & FEA: Simulation of an improper teeth alignment or misaligned bite - ANSYS WB Explicit Dynamics

Click for video with results on

If you have ANSYS WB 19.1 or higher, get the ANSYS Workbench Mechdat file + the 3D model for only $16

VIDEO: If you have ANSYS Workbench 19.1 or higher, watch the 3h 23 min lesson and get the geometry to successfully make the simulation for only $35

AWB 2021 R1 OR HIGHER

286. 43 km/h impact test on 2 laminated glass panes with 1 PVB interlayer - ANSYS Explicit Dynamics SPH

Click for video with results on

If you have ANSYS WB 2021 R1 or higher, get the ANSYS Workbench Mechdat file + the 3D model for only $17

AWB 19.1 OR HIGHER

287. Heating coil submerged in water - ANSYS WB Transient Thermal

Click for video with results on

If you have ANSYS WB 19.1 or higher, get the ANSYS Workbench solved archive + the 3D model for only $17

Discovery LIVE 2021 R1

288. CFD simulation of the blood flow in an artery with aneurysm - ANSYS Discovery LIVE 2021 R1

Click for video with results on

If you have ANSYS Discovery LIVE 2021 R1 or higher, get the DSCO file + the 3D model for only $16

AWB 19.1 OR HIGHER

289. Drop test simulation of a soft boiled egg cut in half - ANSYS WB Explicit Dynamics with Fluids

Click for video with results on

If you have ANSYS WB 19.1 or higher, get the ANSYS Workbench Mechdat file + 3D model for only $16

AWB 2019 R3 OR HIGHER

290. Breakage simulation of blade out or blade off of fan (v1) - ANSYS Workbench Explicit Dynamics

Click for video with results on

If you have ANSYS WB 2019 R3 or higher, get the ANSYS Workbench Mechdat file + 3D model for only $16

☆ The MECHDAT files give you hints for your FEA work or training, by observing our set-up: geometry, materials, mesh, boundary conditions, analysis settings and solution items as seen in their YouTube clips. Solving is not guaranteed 100%, because ANSYS continuously changes the solving algorithms; usually they do a good job, sometimes...

☆ After you made the purchase, open the MECHDAT file and re-solve the FEA as follows:

⇒ for Static and Transient Structural: right click Solution, Clear Generated Data, Solve;

⇒ for Explicit Dynamics: right click Solution, Clear Generated Data, then go to Analysis Settings, Step Controls, Resume From Cycle = 0, Solve.

☆ BE SURE TO HAVE THE SAME OR EVEN A NEWER ANSYS VERSION, BECAUSE OLDER VERSIONS WILL NOT OPEN THE NEWER FILES!